Showing posts with label Royal Enfield. Show all posts
Showing posts with label Royal Enfield. Show all posts

Saturday, 16 May 2015

Riding The Bullet – Radio 4 documentary detailing the Royal Enfield Bullet



Sit back, listen and enjoy the dulcet tones of BBC Radio 4 on a journey through the history of the much-loved Royal Enfield Bullet… Riding The Bullet presented by Steve Carver.

Production notes: first broadcast on 13 July 2005, I recorded the documentary from the radio during a repeat on 23 July 2011.

Wednesday, 8 April 2015

RERCN Tibenham Run

Bleak, grey, flat: hmm, must be Norfolk
If it’s Easter Monday it must be the Royal Enfield Riders Club Norfolk’s Tibenham Run, a piggy-back ride-out to the VMCC’s Shakedown event at Tibenham Aerodrome.


Rightly famous for its many mediaeval churches, Norfolk is also awash with ex-WWII airfields, of which Tibenham, about 15 miles south of Norwich, is one. The site was used  during WWI by the Royal Flying Corps before becoming home to squadrons of American USAAF bombers during the Second World War. Actor James Stewart flew 10 missions from the station and Tibenham was also used as a location for an episode of Dad’s Army: Round and Round Went the Great Big Wheel. Now, like so many other pensioned-off aerodromes, it’s home to a gliding club.

Actor Jimmy Stewart rattles out a tune at Tibenham c.1944
Shakedown marks the beginning of the VMCC Norwich calendar and involves timed speed trials up and down the runway. There’s generally a good turn-out despite what always seems to be a rotten day weather-wise.

This year was no exception: good numbers, great bikes, freezing temperatures. My ride began with a bimble across the byways of south Norfolk interspersed with a blat along the B1113 to meet up with others of the RERCN and then on to Tibenham where we arrived to a steaming mug of coffee in the canteen and a healthy turnout lined up outside.

Here’s a selection of what was to be seen:

Wherever vintage bikes are gathered…

…there will you find old blokes poring over them


Steam-punk Panther with electric start…

…home-made frame, exhausts

and forks, and…er, pretty much everything else

Lovely old CD175 in ‘enjoyed’ condition








’59 Velo Viper…

…yours for six grand

“I see a handsome four-cylinder stranger in your future…”
The Japanese really knew how to make and sell a multi

Monday, 9 March 2015

Saving a Lady

Tappet cover wing nut, early-50s Bullet
Being poor and mean, I prefer to scavenge or else home-brew wherever possible so you can readily imagine my recoiling in miserly horror at the thought of shelling out five quid for something which cost pence (or rupees) to make.

Such a thing is the little gewgaw which holds the tappet cover in place on a Royal Enfield Bullet. It looks cool, mirrors the original Redditch set-up and is actually rather useful if you want access in a hurry or at times of stress. Of course if you're found wanting for lack of spanners, being able to remove the cover will be of little use – but that's to over-think the problem.

Chennai Bullets ship with a domed nut which is not unattractive but doesn't have quite the charm of the original wing nut or the repop version available from the usual sources.

Chennai Bullets ship with a domed nut
Aftermarket repop wing nut







The aftermarket nut is a casting, drilled and tapped through the fat part (much like, I imagine, Kim Kardashian). I don't have a furnace but I do have a lathe though I don't have a ball turning attachment (that's something else I need to make). What all this equates to is I can't cast my own wing nut but I can turn something approximating it in use if not in aesthetics but which won't have the attractive ball-end on the wing.

Clear as mud?

Scrabbling about the workshop for some scrap I lit upon a length of 13mm hex bar. I have a number of these waiting for future projects but for this particular one, the limelight had arrived. Once chucked, I cut off the threaded end, faced it and put on a slight chamfer.

Scrap 13mm hex bar


First steps…
The stud for the cover has an M8 thread (at least, for those Bullets made after 1999). I selected a 6mm drill as a pilot and drilled a suitable hole. Next I used a 6.9 tapping drill for tapping M8. Then I tapped the hole taking care not to snap the tap (I wanted a blind hole). That done, I used a 10mm drill bit to put a little chamfer on the thread.

Drilling the nut…

…and tapping it M8
Setting aside the body of the wing nut I rummaged up a bit of 8mm steel rod, measured a length I deemed suitable to make the 'wing' and set to on the lathe, turning it to a diameter just below 6mm and then threading it M6. I left the other end slightly larger in lieu of a ball.

Turning the 'wing'

Threading the wing M6
Back to the body, I used a centre drill bit on my pillar drill to make a pilot hole, a 5.2mm tapping drill to take it to the required diameter and an M6 tap. I cut off the body at a suitable length put it back in the lathe to face and chamfer it, put a drop of thread locker on the wing, screwed it into the nut and the job was done.

With the thread cut…

…it's time to part off the wing
(I don't like parting off in the lathe)



The finished wing nut in situ
It isn't as pretty as the original but it does have an old-world charm that I think is rather appealing plus I saved a satisfying £5. Now I just have to figure the best way to grind the fins off the cover itself for a ’50s-like appearance.

What's that? Oh, cockney rhyming slang for a 'fiver'. Lady Godiva…

Wednesday, 21 January 2015

Impetuous Youth or, The Tale of the Tardy Royal Enfield Panniers

It is a truth universally acknowledged, that a single man in possession of a recently acquired Royal Enfield 500 Twin, a pocketful of readies and a romantic interest two counties distant, must be in want of some panniers.

It's where we find BP Neal, sometime in mid-1953, weekly riding the 160-mile or so round trip in all weathers between his parents' home in Southampton, digs in Chippenham and workplace in Hanham Road, Kingswood, Bristol, with nothing better than a wartime pressed cardboard suitcase to house a week's worth of work- and leisurewear strapped to the pillion saddle. Highly unsatisfactory.

Panniers then, are the answer. Top quality panniers, waterproof (to a degree) and complete with mounting frames and stout straps. You have the cash, and the shortages of wartime are beginning to fade – go on, treat yourself!

Try telling that to Messrs Jenkin and Purser Motorcycles of Southampton (and choice locations across the South and West). No amount of cajoling will speed the process of acquisition: the panniers are on back-order from Royal Enfield and that's that.

Ah, but impetuous youth! Does he return home, pockets jingling but resigned to a lengthy wait? Not a bit of it. BP decides that if RE won't come to him he'll go to RE – well, write a letter, anyway. That letter is lost in the mists of time but the reply, on official RE headed stationery, isn't. And here it is…

"Unaccustomed as we are to being chivvied by
demanding youths…" RE responds to BP
The Service Department at Royal Enfield responds with charming and kindly formality yet, between the lines, there's a faint but detectable hint of chagrin as they seek to assure that every effort is being made and the J&P order will be executed without delay – it's maybe not all they'd like to execute!

But on this occasion the man on the Clapham omnibus wins the day. How can we know? The camera never lies…

As fine a set of spanking new panniers as ever graced an RE 500 Twin